Applied System Technologies

PVC Explodes at Factory

appsyste — Mon, 12 Mar 2012 12:35:41 +0000

Anyone with experience in compressed air knows how dangerous it is to use PVC for compressed air. People use PVC as a cheap alternative to other piping systems, not realizing how hazardous it truly is. Accidents like this are very common and can easily be avoided. Read the article here.

Infinity Pocket Guide Updated

appsyste — Tue, 24 Jan 2012 19:29:52 +0000

The quad-fold Infinity Pocket Guide has been reprinted with some updates. The new issue number is 6 and the piece is dated January 2012. To download a copy from the website, please click here and register for downloads or fill in the ‘Contact Us’ form on our website to request hard copies.

AST launches ‘Condensate Catcher’

appsyste — Thu, 12 Jan 2012 19:59:09 +0000

The condensate catcher overcomes one of industry’s age old needs; the ability to cost effectively capture and contain condensate released from downstream filtration and drain valves. The key to the system are a diffuser at the inlet cap to the unit, which disperses air and condensate to the sides of the container, while an integrated exhausting vent allows any compressed air to release from the unit to avoid pressurization. For more information click here.

DRI system product launch

appsyste — Tue, 03 Jan 2012 23:36:12 +0000

AST is proud to announce the launch of the new DRI system of point of use accessories. The range includes lockable exhausting valves, water removers and 4 point manifolds. The lockable ball valve (IV unit) is available in sizes ½”, ¾” and 1” and provides OSHA compliance on isolation of downstream power sources, with a base port exhaust and optional muffler. An in-handle display window shows when the unit is in the supply or exhaust position and the unit has two locking points when the handle is turned to the exhaust position. For more information click here.

The Infinity Water Remover (WR unit) provides a cost effective alternative for in-line water removal. With sizes from ½” through 2” and flows from 53cfm to 424cfm these aluminum bodied units incorporate a sight glass for fluid visibility and an automatic N.O. style float drain. For more information click here.

AST warehouse expansion

appsyste — Wed, 28 Dec 2011 20:08:56 +0000

AST has completed it’s second expansion in 12 months with a further doubling of our warehousing capability and addition of further office space. The new warehousing space in Huntersville, NC will be used to support inventory increases in the Infinity and Elevation lines and assembly space for the launch of DRI and Condensate Catcher ranges.

70mm Elevation featured in CABP magazine

appsyste — Wed, 30 Nov 2011 19:50:24 +0000

The new Elevation 70mm bore size has attracted industry attention by showing up in the lastest edition of ‘Compressed Air Best Practices’ magazine. To view the editorial please click here. To visit Compressed Air Best Practice’s website please click here

Manifold product line expansion

appsyste — Fri, 11 Nov 2011 18:54:37 +0000

To enhance the flexibility of our manifold range we are making a couple of changes to the line with immediate effect. The first change is the inclusion of a mounting bracket and screws that allow for slide ‘positioning’ of the manifold on the bracket. In addition each manifold will now be shipped with a single ½” plug as shown on the base of the picture.

We are also launching a new manifold with a ¾” inlet. Allowing for additonal volume of air in-flow this unit has a ¾” NPT inlet and 4 X ½” NPT outlets on the side and a ½” outlet on the base. This new unit will also include the flexible mounting bracket, screws and a single plug. For more information click here.

Elevation literature updated

appsyste — Wed, 26 Oct 2011 19:26:26 +0000

Following the launch of the 70mm Elevation line, we are pleased to advise that there is a new Elevation brochure now available in both electronic and hard copy, covering the entire line from 70mm to 168mm. To download a copy from the website, please click here and register for downloads or fill in the ‘Contact Us’ form on our website to request hard copies.

70mm Elevation Launch

appsyste — Wed, 19 Oct 2011 18:26:05 +0000

Our extremely successful Elevation line of tube and fittings has now been expanded to include a 70mm (2½”) size which complements both the Elevation and larger Infinity range of products. The 70mm is constructed from the same marine grade aluminum as other AST tubing. The Elevation range now covers bore sizes from 70mm (2½”) through to 168mm (6″). For more information on Elevation, please click here.